Table 73 Advanced > Remote MGMT > WWW
LABEL
Apply
Cancel
19.3 The Telnet Screen
You can use Telnet to access the P-79X's command line interface. Specify which interfaces allow
Telnet access and from which IP address the access can come.
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 112 Advanced > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 74 Advanced > Remote MGMT > Telnet
LABEL
Port
Access Status
Secured Client
IP
Apply
Cancel
19.4 The SSH Screen
You can use SSH (Secure Shell) to access the P-79X's command line interface. Specify from which
IP address the access can come.
Chapter 19 Remote Management
DESCRIPTION
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the P-79X using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
P-79X using this service.
Select All to allow any computer to access the P-79X using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the P-79X using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
P-79X Series User's Guide
184