About The Certificate Not Trusted Log; Table 171 Log Description Example - ZyXEL Communications 5 Series User Manual

Internet security appliance
Table of Contents

Advertisement

5|06/08/2004 05:58:20 |172.21.4.187:137
|ACCESS BLOCK
Firewall default policy: UDP (W to W/ZW)

Table 171 Log Description Example

LABEL
#
time
source
destination The NetBIOS packet was sent to the 172.21.255.255 subnet port 137. This was a
notes
message

32.2.2 About the Certificate Not Trusted Log

myZyXEL.com and the update server use certificates signed by VeriSign to identify
themselves. If the ZyWALL does not have a CA certificate signed by VeriSign as a trusted
CA, the ZyWALL will not trust the certificate from myZyXEL.com and the update server. The
ZyWALL will generate a log like "Due to error code(11), cert not trusted: SSL/TLS peer
certif..." for every time it attempt to establish a (HTTPS) connection with myZyXEL.com and
the update server. The V4.00 default configuration file includes a trusted CA certificate signed
by VeriSign. If you upgraded to ZyNOS V4.00 firmware without uploading the V4.00 default
configuration file, you can download a CA certificate signed by VeriSign from
myZyXEL.com and import it into the ZyWALL as a trusted CA. This will stop the ZyWALL
from generating this log every time it attempts to connect with myzyxel.com and the update
server.
Follow the steps below to download the certificate from myZyXEL.com.
1 Go to http://www.myZyXEL.com and log in with your account.
2 Click Download Center and then Certificate Download.
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
This is log number five.
The log was generated on June 8, 2004 at 5:58 and 20 seconds AM.
The log was generated due to a NetBIOS packet sent from IP address 172.21.4.187 port
137.
NetBIOS UDP broadcast packet meant to discover devices on the network.
The ZyWALL blocked the packet.
The ZyWALL blocked the packet in accordance with the firewall's default policy of
blocking sessions that are initiated from the WAN. "UDP" means that this was a User
Datagram Protocol packet. "W to W/ZW" indicates that the packet was traveling from the
WAN to the WAN or the ZyWALL.
Chapter 32 Logs Screens
|172.21.255.255:137
557

Advertisement

Table of Contents
loading

Table of Contents