The Firewall Default Rule Screen; Figure 144 Limited Lan To Wan Irc Traffic Example; Table 68 Limited Lan To Wan Irc Traffic Example - ZyXEL Communications 5 Series User Manual

Chapter 13 Firewall Screens

Figure 144 Limited LAN to WAN IRC Traffic Example

Your firewall would have the following configuration.

Table 68 Limited LAN to WAN IRC Traffic Example

#
1
2
Default
• The first row allows the LAN computer at IP address 192.168.1.7 to access the IRC
service on the WAN.
• The second row blocks LAN access to the IRC service on the WAN.
• The third row is (still) the firewall's default policy of allowing all traffic from the LAN to
go to the WAN.
The rule for the CEO must come before the rule that blocks all LAN to WAN IRC traffic. If
the rule that blocks all LAN to WAN IRC traffic came first, the CEO's IRC traffic would
match that rule and the ZyWALL would drop it and not check any other firewall rules.

13.3 The Firewall Default Rule Screen

Click SECURITY > FIREWALL to open the Default Rule screen.
Use this screen to configure general firewall settings when the ZyWALL is in Router mode.
254
DESTINATIO
SOURCE
N
192.168.1.7 Any
Any Any
Any Any
SCHEDULE SERVICE
Any IRC
Any IRC
Any Any
ZyWALL 5/35/70 Series User's Guide
ACTION
Allow
Drop
Allow