Figure 322 Reports > Traffic Statistics; Table 161 Reports > Traffic Statistics - ZyXEL Communications 5 Series User Manual

Chapter 31 Reports Screens
The web site hit count may not be 100% accurate because sometimes when
an individual web page loads, it may contain references to other web sites that
also get counted as hits.
Figure 322 REPORTS > Traffic Statistics
Enabling the ZyWALL's reporting function decreases the overall throughput by
about 1 Mbps.
The following table describes the labels in this screen.
Table 161 REPORTS > Traffic Statistics
LABEL
Collect
Statistics
Send Raw
Traffic Statistics
to Syslog
Server for
Analysis
Apply
Reset
Interface
540
DESCRIPTION
Select the check box and click Apply to have the ZyWALL record report data.
Select the check box and click Apply to have the ZyWALL send unprocessed traffic
statistics to a syslog server for analysis.
You must have the syslog server already configured in the Log Settings screen.
Click Apply to save your changes to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Select on which interface (LAN, DMZ or WLAN) the logs will be collected. The logs
on the DMZ, LAN or WLAN IP alias 1 and 2 are also recorded.
ZyWALL 5/35/70 Series User's Guide