Ip Alias Setup; Figure 398 Menu 7.2: Tcp/Ip And Dhcp Ethernet Setup - ZyXEL Communications 5 Series User Manual

Figure 398 Menu 7.2: TCP/IP and DHCP Ethernet Setup

DHCP= None
Client IP Pool:
DHCP Server Address= N/A
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
37.4 on page 634
DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the WLAN port (see
15.1 and 15.2.

41.2.2 IP Alias Setup

You must use menu 7.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 7.2.1 - IP Alias Setup, as shown next.
ZyWALL 5/35/70 Series User's Guide
Menu 7.2 - TCP/IP and DHCP Ethernet Setup
Starting Address= N/A
Size of Client IP Pool= N/A
Press ENTER to Confirm or ESC to Cancel:
for information on how to configure these fields.
Chapter 41 Wireless Setup
TCP/IP Setup:
IP Address= 0.0.0.0
IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
Chapter 44 on page 673) in menus
Section
657