Remote Node Profile (3G Wan); Figure 377 Menu 11.2: Remote Node Profile (3G Wan); Table 223 Menu 11.2: Remote Node Profile (3G Wan) - ZyXEL Communications 5 Series User Manual

Chapter 36 WAN and Dial Backup Setup
Table 222 3G Modem Setup in WAN Setup (ZyWALL 5) (continued)
FIELD
PIN Code
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

36.3.8 Remote Node Profile (3G WAN)

enter 2 in Menu 11 - Remote Node Setup to open Menu 11.2 - Remote Node Profile (3G
WAN) (shown below) and configure the setup for your 3G connection.

Figure 377 Menu 11.2: Remote Node Profile (3G WAN)

Rem Node Name= WAN 2
Active= Yes
Outgoing:
My Login= test
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
Pri Phone #= *99#
The following table describes the fields in this menu.

Table 223 Menu 11.2: Remote Node Profile (3G WAN)

FIELD
Rem Node
Name
Active
Outgoing
My Login
My Password
630
DESCRIPTION
A PIN (Personal Identification Number) code is a key to a 3G card. Without the PIN
code, you cannot use the 3G card.
Enter the 4-digit PIN code (0000 for example) provided by your ISP. If you enter the
PIN code incorrectly, the 3G card may be blocked by your ISP and you cannot use
the account to access the Internet.
If your ISP disabled PIN code authentication, enter an arbitrary number.
Menu 11.2 - Remote Node Profile (3G WAN)
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter a descriptive name for the remote node. This field can be up to eight
characters.
Press [SPACE BAR] and then [ENTER] to select Yes to enable the remote node or
No to disable the remote node.
Enter the login name assigned by your ISP for this remote node.
Enter the password assigned by your ISP for this remote node.
Edit IP= No
Edit Script Options= No
Always On= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
ZyWALL 5/35/70 Series User's Guide