Anti-Spam Lists Edit Screen; Figure 186 Security > Anti-Spam > Lists > Edit - ZyXEL Communications 5 Series User Manual

Chapter 16 Anti-Spam Screens
Table 90 SECURITY > ANTI-SPAM > Lists (continued)
LABEL
Use Blacklist
Active
Type
Content
Modify
Insert
Apply
Reset

16.5 Anti-Spam Lists Edit Screen

Click SECURITY > ANTI-SPAM > Lists to display the Anti-Spam Lists screen. Use this
screen to configure an anti-spam whitelist entry to identify legitimate e-mail or a blacklist
entry to identify spam e-mail. You can create entries based on the sender's IP address or e-mail
address. You can also create entries that check for particular MIME headers, MIME header
values or specific subject text.
To create a new anti-spam whitelist or blacklist entry, type the index number where you want
to put the entry and click Insert to display the ANTI-SPAM Rule Edit screen.
If you have already configured an anti-spam whitelist or blacklist entry, you can click the edit
icon to display the ANTI-SPAM Rule Edit screen.
Figure 186 SECURITY > ANTI-SPAM > Lists > Edit
322
DESCRIPTION
Select this check box to have the ZyWALL treat e-mail that matches a blacklist
entry as spam.
This field shows whether or not an entry is turned on.
This field displays whether the entry is based on the e-mail's source IP address,
source e-mail address, an MIME header or the e-mail's subject.
This field displays the source IP address, source e-mail address, MIME header
or subject content for which the entry checks.
Click the edit icon to change the entry. Click the remove icon to delete the entry.
Click the move icon to change the entry's position in the list.
Type the index number where you want to put an entry. For example, if you type
6, your new entry becomes number 6 and the previous entry 6 (if there is one)
becomes entry 7.
Click Insert to display the screen where you edit an entry.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 5/35/70 Series User's Guide