The Bridge Screen; Figure 92 Network > Bridge; Table 31 Network > Bridge - ZyXEL Communications 5 Series User Manual

8.2 The Bridge Screen

Select Bridge and click Apply in the MAINTENANCE > Device Mode screen to have the
ZyWALL function as a bridge.
You can use the firewall and VPN in bridge mode. See the user's guide for a list of other
features that are available in bridge mode.
Click NETWORK > BRIDGE to display the screen shown next. Use this screen to configure
bridge and RSTP (Rapid Spanning Tree Protocol) settings.
Figure 92 NETWORK > Bridge
The following table describes the labels in this screen.
Table 31 NETWORK > Bridge
LABEL
Bridge IP Address Setup
IP Address
IP Subnet Mask
Gateway IP Address
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Type the IP address of your ZyWALL in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address.
Enter the gateway IP address.
Chapter 8 Bridge Screens
163