Figure 487 Menu 24.11 - Remote Management Control; Table 262 Menu 24.11 - Remote Management Control - ZyXEL Communications 5 Series User Manual

Chapter 51 Remote Management
Figure 487 Menu 24.11 – Remote Management Control
TELNET Server:
FTP Server:
SSH Server:
HTTPS Server:
HTTP Server:
SNMP Service:
DNS Service:
The following table describes the fields in this screen.
Table 262 Menu 24.11 – Remote Management Control
FIELD
Telnet Server
FTP Server
SSH Server
HTTPS Server
HTTP Server
SNMP Service
DNS Service
Port
Access
Secure Client IP
Certificate
746
Menu 24.11 - Remote Management Control
Port = 23
Secure Client IP = 0.0.0.0
Port = 21
Secure Client IP = 0.0.0.0
Certificate = auto_generated_self_signed_cert
Port = 22
Secure Client IP = 0.0.0.0
Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443
Secure Client IP = 0.0.0.0
Port = 80
Secure Client IP = 0.0.0.0
Port = 161
Secure Client IP = 0.0.0.0
Port = 53
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Each of these read-only labels denotes a service that you may use to remotely
manage the ZyWALL.
This field shows the port number for the service or protocol. You may change the
port number if needed, but you must use the same port number to access the
ZyWALL.
Select the access interface (if any) by pressing [SPACE BAR], then [ENTER] to
choose from: LAN, WAN, LAN+WAN, DMZ, LAN+DMZ, WAN+DMZ,
LAN+WAN+DMZ, WLAN, LAN+WLAN, WAN+WLAN, LAN+WAN+WLAN,
DMZ+WLAN, LAN+DMZ+WLAN, WAN+DMZ+WLAN, LAN+WAN+DMZ+WLAN
or Disable.
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyWALL. Enter an IP address to restrict access to a client with a matching IP
address.
Press [SPACE BAR] and then [ENTER] to select the certificate that the ZyWALL
will use to identify itself. The ZyWALL is the SSL server and must always
authenticate itself to the SSL client (the computer which requests the HTTPS
connection with the ZyWALL).
Access = Disable
Access = LAN+WAN1+DMZ+WLAN+WAN2
Access = LAN+WAN1+DMZ+WLAN+WAN2
Access = LAN+WAN1+DMZ+WLAN+WAN2
Access = LAN+WAN1+DMZ+WLAN+WAN2
Access = LAN+WAN1+DMZ+WLAN+WAN2
Access = LAN+WAN1+DMZ+WLAN+WAN2
ZyWALL 5/35/70 Series User's Guide