Figure 266 Advanced > Policy Route > Edit; Table 138 Advanced > Policy Route > Edit - ZyXEL Communications 5 Series User Manual

Figure 266 ADVANCED > POLICY ROUTE > Edit
The following table describes the labels in this screen.
Table 138 ADVANCED > POLICY ROUTE > Edit
LABEL
Criteria
Active
Rule Index
IP Protocol
Type of Service
Precedence
Packet Length
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Select the check box to activate the policy.
This is the index number of the policy route.
Select Predefined and then the IP protocol from ALL(0), ICMP(1), IGMP(2),
TCP(6), UDP(17), GRE(47), ESP(50) or AH(51).
Otherwise, select Custom and enter a number from 0 to 255.
Prioritize incoming network traffic by choosing from Any, Normal, Min Delay, Max
Thruput, Max Reliable or Mix Cost.
Precedence value of the incoming packet. Select a value from 0 to 7 or Any.
Type a length of packet (in bytes). The operators in the Length Comparison field
apply to incoming packets of this length.
Chapter 24 Policy Route Screens
461