Figure 493 Ip Routing Policy Example 2 - ZyXEL Communications 5 Series User Manual

2 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the
LAN port.
3 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.
4 Create another rule in menu 25.1 for this rule to route packets from any host (IP=0.0.0.0
means any host) with protocol TCP and port FTP access through another gateway
(192.168.1.100).

Figure 493 IP Routing Policy Example 2

5 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the
LAN port.
6 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.
ZyWALL 5/35/70 Series User's Guide
Menu 25.1 - IP Routing Policy Setup
Rule Index= 2
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 0.0.0.0
port start= 0
Destination:
addr start= 0.0.0.0
port start= 20
Action= Matched
Gateway Type= IP Address
Gateway addr = 192.168.1.100
Type of Service= Don't Care
Precedence = Don't Care
Edit policy to packets received from= No
Press ENTER to Confirm or ESC to Cancel:
Chapter 52 IP Policy Routing
Active= No
Packet length= 10
Len Comp= Equal
end= N/A
end= N/A
end= N/A
end= 21
Redirect packet= N/A
Log= No
755