Cockpit App Navigation Menu; Managing Prostheses; Adding Component - Otto Bock Genium X3 Instructions For Use Manual

8.3.1 Cockpit app navigation menu

Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info

8.4 Managing prostheses

Connections with up to four different components can be stored in the app. However, a compon­
ent can only be connected to one device or remote control at a time.
The following points need to be observed before establishing the connection:
• Bluetooth of the component must be switched on.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down (sole of
the foot must point up) or by connecting/disconnecting the battery charger. Bluetooth is then
turned on for approx. 2 minutes. During this time, the app must be started and used to estab­
lish a connection. If required, Bluetooth on the prosthesis can be switched on permanently
afterwards (see Page 34).
• Bluetooth of the device must be switched on.
• The device must not be in "flight mode" (offline mode), otherwise all wireless connections are
turned off.
The device must be connected to the internet.
•
• The serial number and PIN code of the component being connected must be known. They are
found on the enclosed Bluetooth PIN card. The serial number begins with the letters "SN".
INFORMATION
If the Bluetooth PIN card with the PIN card and serial number of the component is lost, contact
your prosthetist.

8.4.1 Adding component

1) Tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Manage components".
3) In the following screen, tap the "Add component" button.
→ The "Preparation" screen appears. The serial number of the component should be
entered here. The serial number begins with the letters "SN".
22 | Ottobock
Tap the
Additional settings for the connected component can be con­
figured in this menu.
change Product
Name of the connected component
2. Golf
MyModes
Return to the main menu to switch MyModes
Functions
Call up additional functions of the component (e.g. turn off
Bluetooth) (see Page 34)
Settings
Change settings of the currently selected mode (see Page 31)
Status
Query status of the connected component (see Page 35)
Manage components
Add or delete components (see Page 22)
Imprint/Info
Display information/legal notices for the cockpit app
symbol in the menus to display the navigation menu.