Cockpit App Navigation Menu; Managing Components; Adding Component - Otto Bock 17KO1 Series Instructions For Use Manual

Cockpit app

9.3.1 Cockpit app navigation menu

9.4 Managing components

Connections with up to four different components can be stored in the app. However, a component can only be
connected to one mobile device at a time.
INFORMATION
Before establishing the connection, observe the points in the section "Initial connection between Cockpit app and
component" (see Page 88).

9.4.1 Adding component

1) Tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Manage components".
3) Briefly press the button on the control panel of the joint unit to activate recognition (visibility) of the Bluetooth
connection for 2 minutes.
4) Tap the "+" button.
→ The Connection Wizard opens and guides you through the process of establishing a connection.
5) Follow the subsequent instructions on the screen.
6) After the Bluetooth PIN is entered, a connection to the component is established.
→ While the connection is being established, 3 beep signals sound and the
The symbol is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the component. This process may take
up to a minute.
Then the main menu appears with the name of the connected component.
INFORMATION
If establishing a connection to a component is not possible, perform the following steps:
► Delete the component from the Cockpit app if applicable (see the section "Deleting a component").
► If present, delete the component from the Bluetooth settings on the device (unpair).
► Rest the component by connecting and disconnecting the battery charger.
► Add the component again in the Cockpit app (see the section "Adding a component").
90
Tap the symbol in the menus to display the navigation menu. Additional
settings for the connected component can be configured in this menu.
Product
Name of the connected component
MyModes
Return to the main menu to switch MyModes
Settings
Change settings of the currently selected mode (see Page 95)
Status
Query status of the connected component (see Page 98)
Manage components
Add or delete components (see Page 90)
Imprint/Info
Display information/legal notice for the Cockpit app and the connected
component
symbol appears.
C-Brace joint unit 17KO1=*