Connector Monitoring - Siemens SIRIUS M200D Manual
Industrial controls load feeders and motor starters
Hide thumbs
Also See for SIRIUS M200D:
- Operating instructions (4 pages) ,
- Manual (234 pages) ,
- Operating instructions (4 pages)
Table of Contents
Advertisement
Functions
3.7 System monitoring
3.7.5
Connector monitoring
The motor starter monitors whether the infeed connector on the line side of the motor starter
is plugged in. Connector monitoring is implemented by means of an input activated via a
jumper between pins 11 and 12, which informs the motor starter that the connector is
plugged in.
Note
When you use the "connector monitoring" function, you have to connect pin 11 to pin 12 in
the connector.
①
Temperature sensor monitoring
②
Connector monitoring
62
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
Advertisement
Table of Contents
