Siemens SIRIUS M200D Manual page 46

Functions
3.6 Motor protection
Settings
Response to temperature sensor
overload
Temperature sensor
Temperature sensor monitoring
(Motor Starter ES)
Note
Individual parameters can only be set using Motor Starter ES.
Messages and actions
Temperature sensor - overload
Temperature sensor wire break
Temperature sensor short circuit
Temperature sensor deactivated
Overload tripping
46
Device parameter
Message
Default setting
Trip without restart
Deactivated
Yes
•
No (thermoclick)
•
Dependent on parameterization
Dependent on parameterization
Dependent on parameterization
No motor protection through temperature sensor;
motor protection required by means of motor
model.
Trip (overload, wire break or short circuit
pending)
Manual, 08/2014, A5E02548958A/RS-AA/004
Setting range
Trip without restart
•
Trip with restart
•
Warning
•
Deactivated
•
Thermoclick
•
PTC type A
•
Yes
•
No
•
Action
M200D AS-Interface Standard