1.2
Fieldbus interfaces
1.2.1
AS-Interface
Overview
The AS-Interface (actuator sensor interface, AS-i) is an open international standard for
fieldbus communication between distributed actuators and sensors at the lowest control
level.
AS-i complies with the IEC 61158 / EN 50295 standards and was specifically designed for
connecting binary sensors and actuators that comply with these standards. AS-i makes it
possible to replace point-to-point cabling of the sensors and actuators by a bus line.
Figure 1-2
The AS-Interface has the following advantages:
● Flexibility
● Cost effectiveness
● Simple and rapid installation with a minimum of errors
● A common line for transferring data and power
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
Example: M200D AS-i
Product description
1.2 Fieldbus interfaces
11