As-Interface; Connection Options For As-Interface - Siemens SIRIUS M200D Manual

Mounting/Connecting
4.2 Connecting
4.2.8

AS-Interface

Pin assignment
4.2.9

Connection options for AS-Interface

The different methods of connecting the motor starter to the AS-Interface bus cable and the
24 V DC auxiliary voltage are shown in the following table:
Motor starter
Plus M12 branch with integral
cable
Plus M12 branch with socket plus
separate M12 cable
Plus 4 x M12 branch plus separate
M12 cable
1) These cables can be assembled from:
3RK1 902-4GB50-4AA0 control cable, prepared at one end, M12 socket, angled with 5 m cable,
max. 4 A and
3RK1 902-4CA00-4AA0 M12 socket, angled for screw-type connection, 4-pin, max. 0.75 mm
A-coded, max. 4 A
The cables can be replaced by:
3RK1 902-4GB50-4AA0 control cable, prepared at one end, M12 socket, 5 m and
3RK1 902-4CA00-4AA0 M12 socket, angled for screw-type connection, 4-pin, max. 0.75 mm
A-coded, max. 4 A
106
Pin
1
2
3
4
1)
1)
Assignment
U
AS-i+
PWR-AUX -
U
AS-i–
PWR-AUX +
AS-i connection with U
AUX
Manual, 08/2014, A5E02548958A/RS-AA/004
3RK1901-1NR21 (1 m)
3RK1901-1NR22 (2 m)
3RK1901-1NR20
3RK1901-1NR00
2
2
M200D AS-Interface Standard
,
,