Troubleshooting; Response To Faults - Siemens SIRIUS M200D Manual

7.5

Troubleshooting

7.5.1

Response to faults

Description
In some cases, the device can be set in such a way that it responds to faults by either
issuing a warning or by tripping. Examples: "Response to asymmetry", "response to
temperature sensor overload".
The following table shows how the motor starter responds (depending on how it has been
parameterized):
Response:
Message bit:
LED display:
Motor and brake:
Note
With certain faults (e.g. "process image error" or device errors, such as "Switching element
defective"), however, the device always responds by tripping.
This response cannot be changed!
Other methods of indicating faults
Faults in the system can also be indicated as follows:
● When using Motor Starter ES, the relevant fault message appears in plaintext.
● On the fieldbus, the relevant bis is set in the cyclic message frame and/or on the
diagnostics channel.
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
Response 1
Warning
Group warning set
DEVICE flashes yellow
Not shut down
Diagnostics
7.5 Troubleshooting
Fault
Response 2
Trip
Group fault set
DEVICE lights up yellow
SF lights up red
Shut down
141