Mounting/Connecting
4.1
Mounting
4.1.1
Installation rules
Hazardous voltage
Can Cause Death, Serious Injury, or Property Damage
Before starting work, disconnect the system and devices from the power supply.
Simple installation
The distributed M200D AS-i motor starter is designed as a complete device that is easy to
install. Carry out the following steps:
1. If you are using the optional protection guards, install these first.
2. Install the motor starter on a flat surface.
Installation position
The M200D AS-i motor starter is designed for the following installation positions on a flat
surface:
Figure 4-1
Installation positions: horizontal, vertical, flat; must not be positioned as shown on the right
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
DANGER
4
87