Outputs - Siemens SIRIUS M200D Manual

Functions
3.7 System monitoring
Messages and actions
Input 1
Input 2
Input 3
Input 4
Input tripping
Input tripping - end position CW rotation
Input tripping - end position CCW rotation
Input control
Input warning
Sensor supply overload
Quick stop active
3.7.4

Outputs

Description
The motor starter can use the "outputs" device function to control various actuators
(e.g. indicator lights or signaling auxiliary switches). In this case, control processes can be
carried out from different control sources. Different functions and information can be
parameterized for the output.
The digital output is overload/short-circuit proof and is supplied from U
Note
The digital output must not be connected to a digital input because this can establish an
impermissible connection between the U
Output n level
With this device parameter, you determine whether the control signal of the output is inverted
or not dependent on the set parameter.
Output n signal
With this device parameter, you determine how the signal is to be output:
● Continuous signal
● Flashing
60
Message
AS-i
Dependent on parameterization
Dependent on parameterization
Dependent on parameterization
Dependent on parameterization
Trip
Tripping
(must be acknowledged with Motor OFF)
The motor is controlled via the inputs
The motor is controlled via the inputs
Tripping
(must be acknowledged with trip reset)
The signal states of all inputs are undefined in the
event of a "sensor overload".
Trip
and U voltages.
AUX
Manual, 08/2014, A5E02548958A/RS-AA/004
Action
.
AUX
M200D AS-Interface Standard