Data Lists; General Machine Data - Siemens SINUMERIK 840D sl Function Manual

Program code
N170 A3=-2 C3=1
N180 A3=-1 C3=1
N190 Y-10 A4=-1 C4=3
N200 X-20 Y-20 Z10
N210 X-30 Y10 A4=1 C4=1
N220 A3=1 B3=0.5 C3=1.7
N230 X-20 Y30 A4=1 B4=-2 C4=3 ORID
N240 A3 = 0.5 B3=-0.5 C3=1
N250 X0 Y30 C4=1
N260 BSPLINE X20 Z15
N270 X30 Y25 Z18
N280 X40 Y20 Z13
N290 X45 Y0 PR=2 Z8
N300 Y-20
N310 G2 ORIMKS A30 B45 i-20 X25 Y-40 Z0
N320 G1 X0 A3=-0.123 B3=0.456 C3 =2.789 B4=-1 C4=5
B5=-1 C5=2
N330 X-20 G40
N340 M30
23.7

Data lists

23.7.1

General machine data

Number Identifier: $MN_
18094 MM_NUM_CC_TDA_PARAM
18096 MM_NUM_CC_TOA_PARAM
18100 MM_NUM_CUTTING_EDGES_IN_TOA
18110 MM_NUM_TOA_MODULES
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
W5: 3D tool radius compensation - 840D sl only
Comment
; Change in orientation with ORIC
; Change in orientation with ORIC
; New plane definition
; Inside corner with previous block
; Inside corner, new plane definition
; Change in orientation with ORIC
; Change in orientation
; Path movement, new plane,
; Orientation
; With relative programming
; Spline onset, relative programming
; of the orientation remains during
; Spline active
; Helix, orientation with axis program
; Path movement, orientation, non-constant plane
; Deactivation of the tool offset
Description
Number of TDA data
Number of TOA data, which can be set up per tool and
evaluated by the CC
Tool offsets per TOA module
Number of TOA modules
23.7 Data lists
797