Preprocessing In The Dynamic Nc Memory; Data Lists; Machine Data; General Machine Data - Siemens SINUMERIK 840D sl Function Manual

22.5.2

Preprocessing in the dynamic NC memory

Machine data for preprocessing only in the dynamic NC memory with selective selection:
Program code
N30 $MN_MM_DRAM_FILE_MEM_SIZE = 800
N40 $MN_PREPROCESSING_LEVEL = 63
M17
Machine data for preprocessing in the dynamic NC memory with the option of using the static
NC memory and selective selection:
Program code
N30 $MN_MM_DRAM_FILE_MEM_SIZE = 800
N40 $MN_PREPROCESSING_LEVEL = 127
M17
22.6

Data lists

22.6.1

Machine data

22.6.1.1

General machine data

Number Identifier: $MN_
10700 PREPROCESSING_LEVEL
18242 MM_MAX_SIZE_OF_LUD_VALUE
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Comment
; Bit 5 = 1 Selective program selection
; Bit 6 =0 no switch to
; static NC memory if
; dynamic NC memory is full
; Reserve space
; Bit 0-5 = 1
Comment
; Bit 5 = 1 Selective program selection
; Bit 6 = 1 switch to static
; NC memory if dynamic NC
; memory full
; Reserve space
; Bit 0-6 = 1
Description
Program preprocessing level
Maximum LUD-variable array size
V2: Preprocessing
22.6 Data lists
769