Table of Contents
Advertisement
4
AS-i Specification 3.0
The AS-i/PROFIBUS gateways already fulfil the new AS-i Specification 3.0.
The previous specifications (2.1 and 2.0) are supported as well.
All AS-i functions are provided as well cyclically as acyclically via PROFIBUS
DP V1.
In the cyclic data transfer optionally up to 32 bytes I/O data are being transferred
for the binary data of one AS-i network. Additionally, analog signals and all further
commands of the new AS-i specification can be transferred in the management
channel via PROFIBUS.
The serial PROFIBUS Master and the AS-i Control Tools can be used for monito-
ring the AS-i data online via the PROFIBUS DP V1.
Advanced Diagnostics
Diagnostics, which go far beyond the standard diagnostics, facilitate the simple
detection of occasionally occurring configuration errors and further irritations influ-
encing the AS-i communication. In case of an error, the down time of machines
can be minimized or preventive maintenance can be initiated.
Commissioning and monitoring
The AS-i/PROFIBUS Gateways can be commissioned or programmed with the
help of the software "AS-i Control Tools" in combination with the PROFIBUS DP
master simulator. The GSD file is included in the package.
Commissioning, debugging and setting up the AS-i parameters without the soft-
ware can be accomplished by directly using the system's push-buttons, the display
and the LEDs.
Accessories:
Software "AS-i Control Tools"
PROFIBUS DP master simulator.
Please view <chapter 11 > for further accessories.
Subject to reasonable modifications due to technical advances.
10
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
AS-Interface
AS-i Specification 3.0
Copyright Pepperl+Fuchs, Printed in Germany
Advertisement
Table of Contents
