As-I Safety; Safety Slaves (Safety Oriented Slaves) - Pepperl+Fuchs VBG-PB-K20-DMD-C1 Manual

7.9

AS-i safety

This function shows information about the safety slaves and the safety monitor:
• Safety Slaves
• Safety Monitor
• Safety Substitute Value
7.9.1

Safety slaves (safety oriented slaves)

This list shows the "safety-directed input slaves" ("AS-i Safety at Work"), by which
the safety function is released.
X:channel o.k.
R:channel has released
The first area corresponds with the channel 2, the second one with the channel 1.
XR means also: channel 2 is OK and channel 2 has released.
The channels can not be evaluate individually, if the substitution of safety slaves
input data was disconnected in menu:
• command interface/ function profile
or
• slave value substitute.
Both channels must have the same state, otherweise the indication will not be pro-
per.
Subject to reasonable modifications due to technical advances.
44
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Operating in Advanced Display Mode
S A F E T Y S L AV E S
S A F E T Y M O N I T O R
S A F E T Y S U B S T VA L
S A F E T Y O R I E N T E D
S L AV E S
I 1 -
2 - X R I 3 - X X
AS-Interface
Copyright Pepperl+Fuchs, Printed in Germany