Table of Contents
Advertisement
10.3.4.12 Get transm.err.counters (GET_TECB)
In order to get the real number of transcription errors, multiply the value with 2
With this call, the counts of the error counters for B-slaves are being read out (see
chapter 8).
With every reading out of the counts, the error counters will be restarted.
The counts are being read out via the corresponding host interface and will be de-
leted with every read access. The counter´s value is limited to 254. 255 will cause
a counter overflow.
The counts could be independent of the counters, which are displayed in the dis-
play of the gateway.
byte
1
2
byte
1
2
3
4
...
34
10.3.4.13 Get transm.err.counters (GET_TEC_X)
Beginning with a definite slave address, the counts of the n error counters are be-
ing read out with this call.
With every reading out the counts, the error counters will be restarted.
The counts are being read out via the correspondending host interface and will be
deleted with every read access. The counter´s value is limited to 254. 255 will
cause a counter overflow.
Subject to reasonable modifications due to technical advances.
86
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
7
6
5
2
2
2
T
–
7
6
5
2
2
2
T
Command Interface
Request
4
3
2
2
64
16
circuit
Response
4
3
2
2
64
16
result
APF
slave 1B
...
slave 31B
AS-Interface
2
1
0
2
2
2
2
1
0
2
2
2
Copyright Pepperl+Fuchs, Printed in Germany
Advertisement
Table of Contents
