Table of Contents
Advertisement
When adding the CPU module you are prompted for the desired PROFIBUS con-
nection. The standard proposed is for the CPU as PROFIBUS-DP Master. This
can be directly applied. The CPU mode must be set on the DP Master.
The CPU PROFIBUS-DP Properties can be used to display the properties for the
PROFIBUS. Clicking on the "Settings" button displays the PROFIBUS settings.
Profile "DP" is generally used as the PROFIBUS profile.
The bit rate for the PROFIBUS can be set in the window "Properties-PROFIBUS"
® "Network settings" ® "Transmission rate".
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Appendix: Example for startup on a Siemens S7
AS-i/PROFIBUS-Gateway
Copyright Pepperl+Fuchs, Printed in Germany
141
Advertisement
Table of Contents
