Setting Up The As-I Bus - Pepperl+Fuchs CC-LINK Series Compact Manual

CC-Link Gateways

Setting up the AS-i bus

4. Setting up the AS-i bus
1. Connect the unit to power.
2. Connect the AS-i cable to the unit.
3. One after the other connect the AS-i slaves to the AS-i cable and set the
slave addresses. 
You may set the addresses directly on the slave using a portable addresser
or by using the option [SLAVE ADR TOOL] in the display menu of your
gateway.
4. In the display menu select [QUICK SETUP] to use the configuration of all
AS-i circuits connected to the unit.
Confirm with [STORE+RUN].
5. Set the CC-Link address and connect the gateway to the host fieldbus con-
troller. 
You can set the addresses directly using the option [CC-LINK] in the dis-
play menu of your gateway or through the PC using the ASIMON software
with integrated AS-i Control Tools.
For more detailed information please refer to the installation guide for your gateway
which is included with the unit.
8