Table of Contents
Advertisement
4
AS-i Specification 3.0
The AS-i 3.0 EtherNet/IP Gateways already fulfil the current AS-i Specification 3.0.
The previous specifications (2.1 and 2.0) are supported as well.
Advanced Diagnostics
Diagnostics, which go far beyond the standard diagnostics facilitate the simple de-
tection of the occassionally occuring configuration errors and further irritations to-
wards the AS-i communication. So in case of an error the down time of machines
can be minimized or you can initiate preventive maintenance.
Commissioning and monitoring
Commissioning, debugging and setting up of the AS-i parameters can be accom-
plished as follows:
• with the use of the 4 push-buttons on the fronside of the gateway, the display
and the LEDs
• via the RS 232 diagnostic interface and "AS-i Control Tools".
4.1
Accessories
• Software "AS-i Control Tools" with serial cable for connection of the AS-i Master
in Stainless Steel
• Power Supply
Subject to reasonable modifications due to technical advances.
10
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
AS-Interface
AS-i Specification 3.0
Copyright Pepperl+Fuchs, Printed in Germany
Advertisement
Table of Contents
