Table of Contents
Advertisement
7.7.4
Actual Config (actual configuration)
This function shows the state of the actual configuration of the individual AS
ves.
At the end of the list there is a help text describing the abbreviations:
X (O.K.):The configuration data of the detected AS
D (Detected Only):An AS
P (Projected Only):An AS
C (Type Conflict):The configuration data of the detected AS
F (Periph. Fault):The AS
A (Duplicate Adr.):2 AS-i slaves in the indicated address
After selecting the desired AS
tion data are displayed behind the respective address in the following order:
IO (I/O-configuration) ID (ID-configuration) xID1 (extended ID1)
xID2 (extended ID2)
Furthermore the state of the configuration is displayed in plain text.
-
If no AS
i slave is detected and no AS
dots instead of the configuration data are displayed.
7.7.5
LPF (List of periphery faults)
The list shows AS
Empty field: Periphery O.K.
X:
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
AS-i/PROFIBUS GatewayAS-i/PROFIBUS-Gateway
Operating in Advanced Display Mode
A C T U A L C O N F I G
0 A
2 A x
4 p
configuration data.
-
i slave is detected at this address, but not projected.
-
i slave is projected at this address, but not detected.
match the projected configuration data. The actual detected
configuration of the connected AS
-
i slave has a peripheral fault.
-
i slave address the values for the actual configura-
0 A - . . . . -
1 A - 7 A 2 8 - C
T Y P E C O N F L I C T
L P F L I S T O F
P E R I P H . FA U LT S
2 A -
-
i slaves, which have released a peripheral fault.
Peripheral fault
I
1 A - C f
I
3 A d
I
5 A
-
i slave matches the projected
-
i slave is displayed.
-
i slave is projected at a certain address, four
I
1 A - x
I
3 A -
Copyright Pepperl+Fuchs, Printed in Germany
-
i sla-
-
i slave does not
41
Advertisement
Table of Contents
