Table of Contents
Advertisement
prg enable
prj mode
5.2.2
Push-buttons
The push-buttons cause the following:
Mode/⇑›
Set/⇓
OK, ESC
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Connections, Displays and Operating Keys
Automatic address programming enabled.
Exactly one slave is missing in protected operating mode. The
slave can be replaced by another slave of the same type with ad-
dress zero. The master addresses the new slave to the faulty ad-
dress and thus eliminates the configuration error.
The AS-i master is in configuration mode.
Switching between configuration mode and protected operating
mode and saving the current AS-i configuration as the nominal
configuration.
Selecting and assigning the address to a slave.
Changing to the advanced display mode (see <chapter 7>).
AS-i/PROFIBUS Gateway
Copyright Pepperl+Fuchs, Printed in Germany
15
Advertisement
Table of Contents
