3. Drag the selected communication module to the table line for Slot 0.
4. Select the desired communication module from the hardware catalog. Here "20
Byte Digital In/Out (0-31)"
5. Drag the selected communication module to the table line for slot 0.
6. If desired, you can now place additional modules for the command interface and
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Appendix: Example for startup on a Siemens S7
AS-i/PROFIBUS-Gateway
Copyright Pepperl+Fuchs, Printed in Germany
145