I+M Services (Information And Maintenance Services); Quick Setup - Pepperl+Fuchs VBG-PB-K20-DMD-C1 Manual

7.1.4

I+M SERVICES (Information and maintenance services)

The function I+M SERVICES enables or disables the information and maintenace
service.
• CHANGE: the display changes between ENABLED and DISABLED
DISABLED: I+M service is off
ENABLED: I+M service is on.
Switching-off of I+M SERVICES sets additional memory in the SPC3 free. The
DPV0 length limit will be modificated <see chapter 9.3>.
7.2

Quick setup

This menu enables a fast configuration of the AS-i network.
Warning: outputs may be reset!
Pressing "OK" you switch to the submenu "Store AS-i Configuration".
"Store+Run"
With "OK" you store the current AS-i network configuration and the attached sla-
ves as the target configuration. The gateway changes into the protected operating
mode.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
AS-i/PROFIBUS GatewayAS-i/PROFIBUS-Gateway
Operating in Advanced Display Mode
I + M S E R V I C E S
D I S A B L E D
C H A N G E
WA R N I N G :
O U T P U T S M AY B E
R E S E T
S T O R E A S - I
C O N F I G U R AT I O N
S T O R E + R U N
S T O R E + P R J M O D E
Copyright Pepperl+Fuchs, Printed in Germany
25