Configuration Of The Signals: View/Edit - AUMA AUMATIC AC 01.1 Manual

Actuator controls
AUMATIC AC 01.1/ACExC 01.1 Profibus DP

4.4.2 Configuration of the signals: view/edit

20
Æ
Via the menu to parameter:
MAIN MENU (M0)
SETTINGS (M1)
EDIT
LED 1 (LEFT HAND)
CLOSING BLINK

‚ :EDIT
Default values:
Information Table 10, page 27 describes the signals which can be assigned to the LEDs.
Table 10 applies to both the LEDs and the output contacts.
LOCAL CONTROLS (M13)
LED 1 (LEFT HAND) (M1312)
LED 2 (M1313)
LED 3 (M1314)
LED 4 (M1315)
LED 1 (RIGHT HAND) (M1316)
M1312
¿:OK C:ESC
LED 1 (LEFT HAND) = CLOSING BLINK
LED 2 =
LED 3 =
LED 4 =
LED 5 (RIGHT HAND)= OPENING BLINK
Manual
TORQUE FAULT (CLOSE)
THERMO FAULT
TORQUE FAULT (OPEN)