Structural Design And Navigation - AUMA AUMATIC AC 01.1 Manual

Manual

3.3.2 Structural design and navigation

Change groups
Enter the password
.
.
The indications on the display are divided into 3 groups:
.
Group
Group
Group
The active group is displayed on the top right corner of the display.
Change from group
Ò Press
appears.
M0
Change from group
Ò Press
(group
Change from any group
Ò Briefly press
Ò Press
Scrolling
The triangles
scrolling direction (within one group) of scrolling.
In the menu (group
To change the parameters, a password must first be entered.
The following default password is set in the factory: 0000.
After selecting

‚ :EDIT
1. Select figures 0 to 9: Press
2. Move to the next position: Press
3. Repeat steps 1 and 2 for all four digits.
4. To cancel a process: Press
Information If no input is received over a longer period of time (approx. 10 min), the con-
trols automatically returns to the status indication
AUMATIC AC 01.1/ACExC 01.1 Profibus DP
S = status indications
= menu (settings)
M
D = diagnostic indications
M0
OFF S0
E2 100%
OPEN POSITION
to group
S M
C
push button and hold it down for approx. 3 seconds until group
S to group D
C
push button and hold it down until group
M is hereby skipped).
or back to group
M D
C
.
qp
:
 ‚
in the top left corner of the display indicate the possible
OFF
E2
OPEN POSITION
M ), the settings are protected by a password.
, the following is displayed:
EDIT
ENTER PASSWORD
0 * * *
¿:OK C:ESC
qp
C
.
M0
:
:
D0 appears
:
S
S0
100%
.
8
.
S0 .
Actuator controls
11