Diagnostics; Operating Data Logging - AUMA AUMATIC AC 01.1 Manual

Manual
8.2

Diagnostics

8.2.1 Operating data logging

Table of contents:
8.2.1 Operating data logging
8.2.2 Diagnostic indication (D) via the display
The operating data provides details e.g. about the running time, the number
of starts, number of torque faults etc.
The analysis of this data provides valuable information regarding the optimi-
zation of both actuator and valve. When using this information purposefully,
actuator and valve will be carefully operated, e.g. through appropriate
parameter setting.
In case of fault, the logging of operating data makes a quick error diagnostics
possible.
Enable viewing
The
OPERATIONAL DATA
Æ
Via the menu to parameter:
MAIN MENU (M0)
CONFIGURATION (M4)
SPECIAL FUNCTIONS (M40)
EDIT
OPERATIONAL DATA
VIEW ENABLED

¿:OK C:ESC
:EDIT
‚
Default value:
È
Description of the parameter settings:
VIEW NOT ENABLED
The operational data is not indicated in the display
VIEW ENABLED
The operational data is indicated in the display
Viewing the operational data
Æ
Via the menu to parameter:
MAIN MENU (M0)
OPERATIONAL DATA (M2)
OPERATIONAL DATA M200
‚
TOTAL MOTOR RUNTIME
MOTOR RUNTIME
TOTAL STARTS
Various data is monitored by the AUMATIC and saved to a non-volatile
memory (EEPROM). Two counters are provided, one of them is erasable.
The recorded data can be read and deleted via the display. The access right
for deletion is password-protected.
AUMATIC AC 01.1/ACExC 01.1 Profibus DP
configuration must be set to
OPERATIONAL DATA (M4012)
M4012
VIEW ENABLED
Actuator controls
:
VIEW ENABLED
95