Manual
7.11
Profibus DP interface (option)
7.11.1 Bus address setting (slave address)
The AUMATIC may be equipped with one or two (option) Profibus DP inter-
faces. This sub-clause applies to both interfaces. However, only the first
interface is described as an example.
In the menu, the interfaces are designated as follows:
1
st
Profibus DP interface =
2
nd
Profibus DP interface =
Æ
Via the menu to parameter:
MAIN MENU (M0)
SETTINGS (M1)
PROFIBUS DP 1 (M1B)
EDIT
SLAVEADDRESS
2
¿:OK C:ESC
:EDIT
Default value:
Setting range:
AUMATIC AC 01.1/ACExC 01.1 Profibus DP
PROFIBUS DP 1
PROFIBUS DP 2
SLAVEADDRESS (M1B10)
M1B10
2
to
0
125
Actuator controls
77