Monitoring Of The Max. Number Of Starts Per Hour And Max. Running Time Per Hour - AUMA AUMATIC AC 01.1 Manual

Actuator controls
AUMATIC AC 01.1/ACExC 01.1 Profibus DP

7.16.3 Monitoring of the max. number of starts per hour and max. running time per hour

86
.
.
The AUMATIC monitors any exceeding of
the maximum number of starts (motor starts) per hour
the maximum running time (on-time) per hour.
If any of these values has been exceeded, the actuator will however not be
.
stopped, but the following warning signals are sent:
.
.
Status indication
Status indication
Status indication
The warning signals will automatically be cleared if the number of starts per
second and the set max. running time per hour are no longer reached.
An exceeding is also logged in the operating data counters
WRN.STARTS/RUN1
WRN.STARTS/RUN1
WRN.STARTS/RUN2
time warning.
Example:
The AUMATIC signals a total of 3 starts/running time warnings because of
an exceeding of the set cycles/h or running time/h: once 20 min., once 15
min, once 22 min. Afterwards the operating data counters contain the follow-
ing values:
WRN.STARTS/RUN1 = 57
WRN.STARTS/RUN2 = 22
Switching on/off the monitoring of the max. number of starts and the
max. running time
To be able to view settings or to perform modifications, the
parameter must be set to
Information This parameter is also used to switch the operating time monitoring
(page 88) on or off.
Æ
Via the menu to parameter:
MAIN MENU (M0)
CONFIGURATION (M4)
EDIT
MONITOR TRIGGERS
FUNCTION ACTIVE

‚ :EDIT
Default value:
È
Description of the parameter settings:
FUNCTION NOT ACTIVE
The MAX STARTS/HOUR
shown in the display.
FUNCTION ACTIVE
The MAX STARTS/HOUR
the display.
: operation mode OFF/LOCAL =
S0
S0/S6 : operation mode REMOTE =
S2 : WARNING STARTS/RUN
and
WRN.STARTS/RUN2
contains the total of all starts/running time warnings.
contains the max. time duration of a starts/running
min. = total of all time sections (20+15+22 min)
min. = longest time section
FUNCTION ACTIVE
SPECIAL FUNCTIONS (M40)
MONITOR TRIGGERS (M4016)
M4016
¿:OK C:ESC
FUNCTION ACTIVE
and MAX DUTY CYCLE
and MAX DUTY CYCLE
Manual
WRN + NR
WARNING
(page 95).
MONITORING
.
parameters are not
parameters are shown in