AUMA AUMATIC AC 01.1 Manual page 51

Manual
È
Description of the parameter settings:
NOT USED
No signal.
C POS¯¯¯¯¯O
_ _ _
Signal active from reaching the intermediate position to end position OPEN.
C¯¯¯¯¯POS
_ _
Signal active from end position CLOSED to reaching the intermediate posi-
tion.
C POS
_ _ _ _ _
Impulse signal issued when going through intermediate position
Figure 8 shows the signal behaviour in intermediate positions.
Figure 8
1
A
0
1
B
0
1
C
0
1
D
0
A NOT USED
B C POS¯¯¯¯¯¯O
_ _ _
C C¯¯¯¯¯¯POS
_ _ _
D C POS
_ _ _ _ _ _
Further feedback signals which can be used together with the multiport
valve function (option):
Description of the parameter settings:
SETPOINT REACHED
As each intermediate position is processed as a setpoint, the signal
SETPOINT REACHED
ACTUATOR MOVING
Is signalled as long as the actuator is still running to the intermediate posi-
tion and no intermediate position signal has been issued yet.
AUMATIC AC 01.1/ACExC 01.1 Profibus DP
O
_
O
_
POS
1
2
O
O
is issued after reaching any intermediate position.
Actuator controls
Active signal
Signal not activated
POS = intermediate position
51