Comp Screen - Yamaha TF5 User Manual

COMP screen

Displayed when you tap the COMP button in the TOOLBAR area.
Allows you to configure the compressor for each channel.
1
COMP button
Turns the compressor on and off.
2
1-knob button
Switches between 1-knob mode and manual mode.
3
1-knob level slider (1-knob mode only)
Adjusts the amount of 1-knob compressor applied.
Not displayed during manual mode.
4
Compressor input level slider
Displays the compressor's input level.
5
Threshold slider
Determines the level at which the compressor is applied.
6
Compressor graph
Displays a visual representation of the current settings.
7
Ratio slider
Determines the amount of compression that is applied.
8
Attack slider
When the input signal exceeds the threshold, this setting determines how quickly the maximum amount of compressor is
applied.
9
Release slider
When the input signal drops below the threshold, this setting determines how much time passes before the compressor is
no longer applied. The value here is expressed as the time required for the level to change by 6dB.
0
Out Gain slider
Adjusts the output level of the compressor.
A
Knee button
Determines the how gradual or sudden the curve is at the threshold. A soft knee means that compression is applied gradually
as the signal exceeds the threshold; a hard knee means a more sudden transition.
B
GR (gain reduction) meter
Displays the amount by which the signal's gain is reduced.
- 24 -
Screen areas
TF StageMix
User's Guide