Effects. Selecting, Editing And Storing The Effect You Want - Yamaha M7CL Quick Start Manual

The virtual rack; effects and graphic EQ:

Effects. Selecting, editing and storing the effect you want.

From the main rack screen, press the center of the virtual rack mounted effect. This brings up the EFFECT
parameter pop-up.
The parameters can be edited using the
encoders below. If there are more than one
row of parameters, touch a knob from the
row you want before using the encoders.
To select another type of effect either; press the colored effect image to reveal the EFFECT TYPE pop-up or
press the [LIBRARY] button at the top of the pop-up and use the EFFECT LIBRARY pop-up. Change the effect
either by pressing the color image or by scrolling the library list with any of the encoders below the screen.
[LIBRARY] button or colored effect image.
Edited effects can be stored in library locations 058 to 199. Positions 001 to 057 are read only locations. Positions
049 to 058 are reserved for future read-only effects. Note the best quality Rev-X reverbs are in 046, 047 and 048!
Recall a new effect or store your edited
effect from this pop-up.
Recall a new effect from this pop-up.
5/20
M7CL Quick Start Guide Part 2