Editing Effect Settings - Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual

Recording/Playback/Remote Control

Editing Effect settings

The 01X can also be used to edit the plug-in effects in
Cubase SX.
Using the 01X to control the effects in Cubase SX is essen-
tially a three-stage operation: 1) setting up, 2) adjusting the
send levels, and 3) changing the effect settings.
1) Setup
q Select an audio track and call up the Channel Settings
window.
Click on the track, then click the "e" button in the
track's box.
Insert Effects
80
01X Owner's Manual
"e" button
EQ controls Send Effects
w Select the desired effects.
Do this within Cubase. Press [F6] for the Send Effects,
or press [F7] for the Master Effects, then click the
black box in the effect slot to call up the pop-up menu
of the effect types and select the desired effect. Also,
click the 'power' button to turn on the effect and click
the "e" (Edit) button to call up the edit window for the
effect.
Edit button
On/off ('power') button
• The Master Effects apply to the overall mix, and do not appear in
the Channel Settings window.
• You can also turn on the effect from the 01X in the Send parame-
ters (see below).