Parameter Change - Yamaha M7CL Owner's Manual

3.2 PARAMETER CHANGE

Reception
This message is echoed if [Parameter change ECHO] is ON.
This message is received if [Parameter change RX] is ON and [Rx CH] matches
the Device number included in the SUB STATUS. When a parameter change is
received, the specified parameter will be controlled. When a parameter request
is received, the current value of the specified parameter will be transmitted as a
parameter change with its Device Number as the [Rx CH].
Transmission
If [Parameter change TX] is ON, and you edit a parameter for which control
change transmission has not been enabled, a parameter change will be
transmitted with the [Tx CH] as its device number.
In response to a parameter request, a parameter change will be transmitted with
[Rx CH] as its device number.
Command rx/tx
F0 43 1n 3E 11 ... F7 rx/tx
RARAMETER CHANGE
F0 43 3n 3E 11 ... F7 rx/tx
PARAMETER REQUEST
4 PARAMETER CHANGE details
4.1 Current Scene, Setup, Backup, User Setup
4.1.1 Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding parameter will be changed
immediately the data is received.
Transmission
Data will be transmitted with the [Device Number] in [Tx CH] when
[Parameter change Tx] is on and the parameter is not registered on the [control
change assign table].
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E Digital mixer
MODEL ID 00010001 11 M7CL
DATA 0ccccccc cc
Category
DATA 0eeeeeee ee Element no.
0eeeeeee ee
Element no.
0iiiiiii ii
Index no.
0iiiiiii ii
Index no.
0ccccccc cc
Channel no.
0ccccccc cc
Channel no.
0ddddddd dd data
: :
EOX 11110111 F7 End of exclusive
function
M7CL native parameter change
M7CL native parameter request
4.1.2 Format (Parameter request)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding parameter will be changed
via ParameterChange immediately the data is received.
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 3n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E Digital mixer
MODEL ID 00010001 11 M7CL
DATA Category 0ccccccc cc
DATA 0eeeeeee ee Element no.
0eeeeeee ee Element no.
0iiiiiii ii Index no.
0iiiiiii ii
Index no.
0ccccccc cc
Channel no.
0ccccccc cc
Channel no.
EOX 11110111 F7
End of exclusive
4.1.3 Data category
DATA CATEGORY
0x01 00000001
4.2 Function call – library store, recall –
4.2.1 Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding parameter will be changed
immediately the data is received.
Transmission
Data will be transmitted with the [Device Number] in [Tx CH] when
[Parameter change Tx] is on.
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E Digital mixer
MODEL ID 00010001 11 M7CL
DATA CATEGORY 00000000 00 OTHER DATA
FUNCTION NAME 01001100 "L" (ASCII CODE)
01101001 "i" (ASCII CODE)
01100010 "b" (ASCII CODE)
0fffffff ff (ASCII CODE)
0fffffff ff (ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
0mmmmmmm mm (ASCII CODE)
DATA 0mmmmmmm mh number High
0mmmmmmm ml number Low
0ccccccc ch channel High
0ccccccc cl channel Low
EOX 11110111 F7 End of exclusive
MIDI Data Format
NAME
Current Scene/Setup/Backup/
User Setup Data
M7CL Owner's Manual
257