Output Frame Rate; Return To Home; Factory Reset; About Us - NovaStar NovaPro UHD Jr User Manual

NovaPro UHD Jr All-in-One Controller
User Manual
5.9.3 Fn
The Fn button on the device front panel can be customized to a Synchronization,
Preset Settings, Freeze, Black Out, Test Pattern, Quick Configuration, Image
Color, Main Layer or Priority shortcut button.

5.9.4 Output Frame Rate

You can set the output frame rate of the image output by Ethernet port. The range is
23.98 Hz–120 Hz and the default setting is 60 Hz.

5.9.5 Return to Home

You can set the period of time during which the system stays at the current page
before returning to the homepage automatically when there is no operation
performed. The default setting is 60s and the maximum value is 3600s.

5.9.6 Factory Reset

You can reset all user data on the device to factory settings.

5.9.7 About Us

You can view the following information.




5.10 Partial Reset

You can keep the saved parameters and reset the unsaved parameters to factory
settings.
The unsaved parameters include renaming, loading RCFGx files, BKG image files,
preset parameters, Fn button settings, IP & mask parameters and language settings.

5.11 Communication Settings

5.11.1 Communication Mode

The device is connected to the PC via both USB port and Ethernet port. The
communication modes include USB Preferred and LAN Preferred.
www.novastar.tech
Device hardware version
Company website (www.novastar.tech)
Email address (support@novastar.tech)
5 Menu Operations
28