Configuring Maintenance Actions - Siemens Simatic PCS7 Function Manual

Configuring the maintenance stations
5.11 Advanced diagnostics settings
Deleting maintenance targets
1. In the "Maintenance targets" area, select the maintenance target you want to delete.
2. Click "Delete".
The target object is deleted.
3. Click "OK".
The "Advanced Diagnostics Settings" dialog box closes.
Result
After OS compilation and subsequent download, the modified text is displayed in the process
control.
Additional information
You can find additional information on selecting maintenance targets in the section
""Maintenance" view (Page 146)".
5.11.1.3

Configuring maintenance actions

Introduction
An action to be performed can be assigned to a requested maintenance action in the process
control. The assignment is made in the "Maintenance" view of the faceplate.
Seven action objects are created automatically by the system.
Automatically created action objects are:
● Disassembly
● Device swap
● Calibration
● Zero adjustment
● Cleaning
● Service
● Other
Texts for the automatically created maintenance actions are available in multiple languages.
You can find information on this in the
configuration manual, section "Setting languages".
An action object has the properties "Name:" and "Name for user:".
The name of the maintenance action is entered in the "Name:" entry field.
The name that a maintenance engineer can select from the drop-down list is entered in the
"Name for user:" entry field.
You can add, change and/or delete action objects.
The number of action objects is not limited.
58
Process Control System PCS 7; Operator Station
Function Manual, 03/2016, A5E36187641-AA
Maintenance Station