Mounting With Brackets - ABB PFEA 111 User Manual

D.8.1 Mounting with Brackets
To achieve the best
measuring direction,
turn the load cell to
a suitable position
before drilling the
bracket.
3BSE029380R0101 Rev C
The optional bracket is intended to facilitate mounting on horizontal surfaces.
Possible ways of mounting using brackets.
1. Mark the location of the mounting holes.
2. Drill the holes and cut threads, according to
3BSE010457, Rev. B.
3. Install according to the instructions in
Tension Electronics PFEA111/112, User Manual
Section D.8.1 Mounting with Brackets
Mounting
hole
Section D.18, Dimension Drawing,
Section D.8, Mounting the Load Cells.
D-11