Installing Junction Box Pfxc 141 - ABB PFEA 111 User Manual

2.6 Installing Junction Box PFXC 141

3BSE029380R0101 Rev C
PFXC 141 are normally used for connection of Pressductor
between load cells and tension electronics is long. The cables fixed to the load cells and the
cable to the control unit are to be connected to the junction box.
The junction box PFXC 141 shall be mounted adjacent to the load cells and located in a
protected position easily accessible for service.
The dimensions of the junction box are shown in
Holes not used must be plugged.
For circuit diagram see Appendix A.5.3 Junction Box PFXC
(6 x)
Figure 2-11. Dimensions of Junction Box PFXC 141
Tension Electronics PFEA111/112, User Manual
Section 2.6 Installing Junction Box PFXC 141
Figure
D = 6–12 mm (Cable gland Pg16)
®
load cells where the distance
2-11.
141.
2-11