Measuring Values On The Display - ABB PFEA 111 User Manual

4.6 Measuring values on the display

3BSE029380R0101 Rev C
Depending on the selected unit, the measuring values will be presented differently, see
Table 4-1 and Table 4-2.
Load cell [N]
nominal load
0.1 [kN] XX XXX.X
0.2 [kN] XX XXX.X
0.5 [kN] XX XXX.X
1 [kN] XXX XXX
2 [kN] XXX XXX
5 [kN] XXX XXX
10 [kN] X XXX XX0
20 [kN] X XXX XX0
50 [kN] X XXX XX0
100 [kN] X XXX X00
200 [kN] X XXX X00
Table 4-1. Measuring values presented on the display.
Load cell [N/m]
nominal load
0.1 [kN] XX XXX.XX
0.2 [kN] XX XXX.XX
0.5 [kN] XX XXX.XX
1 [kN] XXX XXX.X
2 [kN] XXX XXX.X
5 [kN] XXX XXX.X
10 [kN] X XXX XXX
20 [kN] X XXX XXX
50 [kN] X XXX XXX
100 [kN] X XXX XX0
200 [kN] X XXX XX0
Table 4-2. Measuring values presented on the display.
X in Table 4-1 and Table 4-2
0 indicates that the value is not changed if the value changes.
Tension Electronics PFEA111/112, User Manual
Section 4.6 Measuring values on the display
[kN]
XX.XXXX X XXX.XX
XX.XXXX X XXX.XX
XX.XXXX X XXX.XX
XXX.XXX XX XXX.X
XXX.XXX XX XXX.X
XXX.XXX XX XXX.X
X XXX.XX XXX XXX
X XXX.XX XXX XXX
X XXX.XX XXX XXX
X XXX.X XXX XX0
X XXX.X XXX XX0
[kN/m]
XX.XXXXX X XXX.XXX
XX.XXXXX X XXX.XXX
XX.XXXXX X XXX.XXX
XXX.XXXX XX XXX.XX
XXX.XXXX XX XXX.XX
XXX.XXXX XX XXX.XX
X XXX.XXX XXX XXX.X
X XXX.XXX XXX XXX.X
X XXX.XXX XXX XXX.X
X XXX.XX XXX XXX
X XXX.XX XXX XXX
indicates that the figure is changed if the value is changed.
[kg] [lbs]
X XXX.XX
X XXX.XX
X XXX.XX
XX XXX.X
XX XXX.X
XX XXX.X
XXX XXX
XXX XXX
XXX XXX
X XXX XX0
X XXX XX0
[kg/m] [pli]
X XXX.XXXX
X XXX.XXXX
X XXX.XXXX
XX XXX.XXX
XX XXX.XXX
XX XXX.XXX
XXX XXX.XX
XXX XXX.XX
XXX XXX.XX
XXX XXX.X
XXX XXX.X
4-3