Mounting Brackets; Figure 2-25 Single And Multiple Stream Sample Conditioning Assemblies - ABB NGC8206 User Manual

Part Number Description
Designed to remove condensing sample line liquid or water that has penetrated the
sample probe. The system expels the liquid or water downward into the bottom of the
Armstrong trap drainer via inertial separation. Sample gas is extracted from the fitting at
the top of the Armstrong accumulator. The pressurize accumulator expels collecting liquid
from the bottom by a modulation float valve design that triggers liquid build-up in the trap
2104677-001 accumulator.

2.16.2 Mounting Brackets

Two sample conditioning system mounting brackets are available: a single stream
bracket or a multiple stream bracket
See

Figure 2-25 Single and Multiple Stream Sample Conditioning Assemblies

2101510 Rev. AG
•
Particulate/coalescing filter
•
Liquid/vapor separator
•
Balston housing/ filter
•
Liquid separator Armstrong drainer/trap
•
0-30 psi gauge
•
0-1600 cc/min adjustable metered bypass
Figure 2-26 and Figure 2-27
(Figure 2-25) for up to three modules.
for installed dimensions.
Page 2–35