ABB PFEA 111 User Manual page 37

9
HangWeight
[XXXXXX] N
10
VoltageOut?
[Yes]
No
11
12
13
CurrentOut?
[Yes]
No
14
15
To
WebTension
16
Finished
PressOk
3BSE029380R0101 Rev C
Yes
SetTensionAt10V
[XXXXXX] N
FilterSettings
[250 ms 1.5 Hz]
Yes
SetTensionAt20mA
[XXXXXX] N
FilterSettings
[250 ms 1.5 Hz]
In the Hang Weight menu the units N/m, kN/m, kg/m, and pli may not be used. If one of these
units have been selected in the presentation menu the unit in the HangWeight menu will be
shown and entered according to
Table 3-1. Units used in the Hang Weight menu.
Selected unit in the
presentation menu
N/m
kN/m
kg/m
pli
Tension Electronics PFEA111/112, User Manual
Section 3.8.1 Performing Fast Setup using Hanging Weights
1. Apply a known weight on the roll (see
2. Enter the value of the known weight. Confirm with
Select Yes and press
Enter the tension value corresponding to 10 V.
Confirm with .
Select filter settings (15, 30, 75, 250, 750 or 1500 ms) from
the list with or . Confirm with
Select Yes and press
Confirm with .
Enter the tension value corresponding to 20 mA.
Confirm with .
Select filter settings (15, 30, 75, 250, 750 or 1500 ms) from
the list with or . Confirm with
Press to finish the fast setup and go to the operator
menu.
Table 3-1.
Shown and entered unit
in the Hang Weight menu
N
kN
kg
lbs
Figure 3-1).
to set up the voltage output.
.
to set up the current output.
.
.
3-7