ABB PFEA 111 User Manual page 181

Bearing housing
Lagerhus
Load cell
Lastcell
Fundament
Foundation
3BSE029380R0101 Rev C
Table F-1. MoS lubricated, galvanized Screws According to ISO 898/1
2
Strength class
(1)
8.8 (12.9)
Table F-2. Waxed Screws of Stainless Steel According to ISO 3506
Strength class
(1)
A2-80
(1) Strength class 12.9 is recommended for 50 kN load cells, when large
overloads are expected, especially if the fixing screws are subjected to
tension.
Roll
Rulle
Pressductor
System
Figure F-3. Typical Installation
Tension Electronics PFEA111/112, User Manual
Dimension Tightening torque
M16 170 (286) Nm
Dimension Tightening torque
M16
Upper adapter plate
Övre mellanläggsplatta
Lower adapter plate
Undre mellanläggsplatta
Section F.7.2 Mounting
187 Nm
F-9